Hot!SD WAN problem

Author
FortiAymen
New Member
  • Total Posts : 7
  • Scores: 0
  • Reward points: 0
  • Joined: 2017/08/24 07:39:51
  • Status: offline
2017/09/03 06:37:33 (permalink)
0

SD WAN problem

Hi, i'm novic in Fortiworld i need your help...
 
i have tow internet connexions (WiMax and ADSL), so i activate Link Load Balancing feature (SD WAN) in FortiOS 5.6
Everything  is OK...
but, i want to redirect Exchange server traffic through WiMax link... how can i d it?
thank you in advance
#1

3 Replies Related Threads

    alago
    New Member
    • Total Posts : 20
    • Scores: 5
    • Reward points: 0
    • Joined: 2017/06/04 11:45:32
    • Status: offline
    Re: SD WAN problem 2017/09/03 13:41:19 (permalink)
    0
    Hello @FortiAymen,
     
    If i understant you correctly you need to use a policy route.
     
    Go to System > Feature Visibility and Active the Advance Routing feature.
     
    Then you need to create a policy route, goto Network > Policy Route and then create a policy route to match your requirements.
     
    You can also do it by the CLI with the following commands:
     
    config router policy
        edit 0
            set input-device "internal1" #match this with your exchange server interface gateway
            set srcaddr "exchangeServer" #match this with your Exchange object in Fortigate
            set dstaddr all
            set output-device "WiMax" #The interfce rou want to route this traffic trought
            set gateway 0.0.0.0 #if you have more than 1 ip on this interface i strongly recommend you to use the ip you set as your reverse dns.
        end
     
    http://help.fortinet.com/...tic/Policy_Routing.htm
     
    I hope this can help you.
     
     
     
     
     
     
     
     
    #2
    MikePruett
    Platinum Member
    • Total Posts : 672
    • Scores: 13
    • Reward points: 0
    • Joined: 2014/01/08 19:39:40
    • Location: Montgomery, Al
    • Status: offline
    Re: SD WAN problem 2017/09/11 19:08:23 (permalink)
    0
    Alago hit the nail on the head. Just policy route your exchange server to use the desired connection and you are on your way.

    Mike Pruett
    Fortinet GURU
    #3
    alago
    New Member
    • Total Posts : 20
    • Scores: 5
    • Reward points: 0
    • Joined: 2017/06/04 11:45:32
    • Status: offline
    Re: SD WAN problem 2017/09/12 13:45:08 (permalink)
    0
    Thank you @MikePruett. xD
     
     
    #4
    Jump to:
    © 2017 APG vNext Commercial Version 5.5