Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
semyotai
New Contributor

FortiDDNS : Unable to retrieve DDNS server information

Hi All,

 

I got error as below when FortiDDNS configured in my Fortigate 60D. Firmware version is 5.2.5

Unable to retrieve DDNS server information from the FortiGuard Service

 

After performing some troubleshooting commands, error as below appeared.

CTL_KBR #

1490242872: Start to update FortiGuardDDNS (ctl-kbr.fortiddns.com)

1490242872: next wait timeout 10 seconds

fgd_ddns_socket()-743: cannot connect to 172.23.83.80:443

1490242877: Failed on update FortiGuardDDNS (ctl-kbr.fortiddns.com), next try at 1490242937

1490242877: next wait timeout 10 seconds

1490242887: next wait timeout 10 seconds

 

Is this issue related to public IP has been blacklisted? 

 

3 REPLIES 3
s4m04
New Contributor

I'm having the same issue.. did you solve the problem?

 

Dave_Hall
Honored Contributor

Have you tied the DDNS host name to your WAN interface?

 

 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
s4m04

Hi Dave,

thank you for your answer..

Yes, I have 2 WAN interfaces on this fortigate and I've tried with both.. Like you, I'm using FortiGuard DNS Servers.

My guess is that because both of the routers behind the firewall do NAT, my WAN addresses are internal addrees 192.168.x.x . I've configured a DMZ host on the router that points to the firewall internal WAN IP and everything else works just fine.

TBH I was thinking that this would have not been a problem but I can't see any other explanation or difference between this and another Fortigate Unit where I use DDNS without problem. I'm using 6.0.3 on both units.

I did not try to configure it directly from the CLI.. Maybe that's just a GUI issue.

Labels
Top Kudoed Authors