Helpful ReplyHot!FortiView only shows now

Author
kinmun
Gold Member
  • Total Posts : 222
  • Scores: 4
  • Reward points: 0
  • Joined: 2015/03/04 17:56:59
  • Status: offline
2015/05/20 19:11:20 (permalink)
0

FortiView only shows now

i noticed that my Fortiview only shows data for now.
there is no data in 5 mins, 1 hour and 24 hours.
what is the settings I need to configure ?
i have analyzer installed as well.
logs is configured to store & upload to analyzer daily at 23:59.
 
 
#1
kinmun
Gold Member
  • Total Posts : 222
  • Scores: 4
  • Reward points: 0
  • Joined: 2015/03/04 17:56:59
  • Status: offline
Re: FortiView only shows now 2015/05/24 18:31:37 (permalink)
0
only the All Sessions in Fortiview have information to show.
the rest like Applications only have now logs to show.
is this normal ?
 
#2
YtseJam
Silver Member
  • Total Posts : 71
  • Scores: 0
  • Reward points: 0
  • Joined: 2014/09/23 20:44:30
  • Status: offline
Re: FortiView only shows now 2015/05/24 18:58:41 (permalink)
0
Hi,
 
Kindly check your log settings, I think your settings was in "realtime" that's why it shows only "now". Or change your "Display logs from" to FortiAnalyzer under Log & Report>Log Config>Log Settings
 
 
#3
kinmun
Gold Member
  • Total Posts : 222
  • Scores: 4
  • Reward points: 0
  • Joined: 2015/03/04 17:56:59
  • Status: offline
Re: FortiView only shows now 2015/05/24 19:10:59 (permalink)
0
realtime is not selected.
 
have since changed to display from analyzer. it was set to disk previously.
 

Attached Image(s)

#4
kinmun
Gold Member
  • Total Posts : 222
  • Scores: 4
  • Reward points: 0
  • Joined: 2015/03/04 17:56:59
  • Status: offline
Re: FortiView only shows now 2015/05/24 19:10:59 (permalink)
0
realtime is not selected.
 
have since changed to display from analyzer. it was set to disk previously.
 
#5
kinmun
Gold Member
  • Total Posts : 222
  • Scores: 4
  • Reward points: 0
  • Joined: 2015/03/04 17:56:59
  • Status: offline
Re: FortiView only shows now 2015/05/24 19:10:59 (permalink)
0
realtime is not selected.
 
have since changed to display from analyzer. it was set to disk previously.
 
#6
YtseJam
Silver Member
  • Total Posts : 71
  • Scores: 0
  • Reward points: 0
  • Joined: 2014/09/23 20:44:30
  • Status: offline
Re: FortiView only shows now 2015/05/24 19:13:56 (permalink)
0
After changing, is it still the same as before?
#7
kinmun
Gold Member
  • Total Posts : 222
  • Scores: 4
  • Reward points: 0
  • Joined: 2015/03/04 17:56:59
  • Status: offline
Re: FortiView only shows now 2015/05/24 19:19:13 (permalink)
0
yes, still the same. sources, applications, destinations shows nothing in 5 min, 1 hour n 24 hours.
only All sessions is showing.
is this normal ?
#8
YtseJam
Silver Member
  • Total Posts : 71
  • Scores: 0
  • Reward points: 0
  • Joined: 2014/09/23 20:44:30
  • Status: offline
Re: FortiView only shows now 2015/05/24 19:26:40 (permalink)
0
Can you try to change it in "realtime"? But from your analyzer, how's the logs display?
 
#9
markwen
New Member
  • Total Posts : 10
  • Scores: 0
  • Reward points: 0
  • Joined: 2013/05/22 16:15:01
  • Status: offline
Re: FortiView only shows now 2015/05/24 19:39:14 (permalink)
0
Correct me if I'm wrong, but doesn't "Enable local reports" need to be enabled to view this kind of info from the FortiGate dashboard? Otherwise it won't store historical data in it's local db.
#10
kinmun
Gold Member
  • Total Posts : 222
  • Scores: 4
  • Reward points: 0
  • Joined: 2015/03/04 17:56:59
  • Status: offline
Re: FortiView only shows now 2015/05/24 19:39:21 (permalink)
0
still the same after changing to realtime.
 
from analyzer, everything is showing up
 
#11
kinmun
Gold Member
  • Total Posts : 222
  • Scores: 4
  • Reward points: 0
  • Joined: 2015/03/04 17:56:59
  • Status: offline
Re: FortiView only shows now 2015/05/24 20:00:54 (permalink)
0
enabled local reports is not recommended.
 
 

Attached Image(s)

#12
YtseJam
Silver Member
  • Total Posts : 71
  • Scores: 0
  • Reward points: 0
  • Joined: 2014/09/23 20:44:30
  • Status: offline
Re: FortiView only shows now 2015/05/24 20:57:36 (permalink) ☄ Helpfulby maeLove 2015/05/28 18:17:16
0
I think you should stick with realtime settings then if you want to monitor your logs just go with your analyzer. Since you have FortiAnalyzer, let it manage the reports then for your fortigate box, let it do the firewalling. Just a suggestion. 
 
Regards,
Jam
post edited by YtseJam - 2015/05/25 03:29:44
#13
Irfan Pathan
New Member
  • Total Posts : 11
  • Scores: 0
  • Reward points: 0
  • Joined: 2012/08/13 04:51:23
  • Location: Indore (India)
  • Status: offline
Re: FortiView only shows now 2015/05/27 00:25:31 (permalink) ☄ Helpfulby maeLove 2015/05/28 18:17:54
0
Hi,

Upgrade your firmware to v5.2.3
See attached screenshot.
 
-Irfan Pathan
 

Attached Image(s)

#14
gustav.koekemoer@voxtelecom.co.za
New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2015/06/11 22:31:35
  • Status: offline
Re: FortiView only shows now 2018/04/06 02:09:59 (permalink) ☄ Helpfulby sagipael 2020/05/27 06:08:47
0
Hi All
 
I believe I have just fixed this issue. 
 
If you setup your Analyzer under "config log fortianalyzer setting" it seems to always take preference in Fortiview 5min,1H and 24H even if you select "disk" as the GIU view.
 
I moved my config to "config log fortianalyzer3 setting" and I can now view historical disk logs via Fortiview and the Analyzer is working fine.
 
Regards
Gus
 
 
#15
sagipael
New Member
  • Total Posts : 5
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/06/25 22:21:11
  • Status: offline
Re: FortiView only shows now 2020/05/27 06:10:17 (permalink)
0
Thanks! that works!
 
 Ver 5.6.12
 
gustav.koekemoer@voxtelecom.co.za
Hi All
 
I believe I have just fixed this issue. 
 
If you setup your Analyzer under "config log fortianalyzer setting" it seems to always take preference in Fortiview 5min,1H and 24H even if you select "disk" as the GIU view.
 
I moved my config to "config log fortianalyzer3 setting" and I can now view historical disk logs via Fortiview and the Analyzer is working fine.
 
Regards
Gus
 
 




#16
Jump to:
© 2020 APG vNext Commercial Version 5.5