Hot!FGT platforms with CPU, memory and supported firmware

Author
rwpatterson
Expert Member
  • Total Posts : 8359
  • Scores: 197
  • Reward points: 0
  • Joined: 2006/08/08 10:08:18
  • Location: Long Island, New York, USA
  • Status: offline
2013/08/10 05:51:33 (permalink)
4 (1)

FGT platforms with CPU, memory and supported firmware

Below is a list of current and past Fortigate and FortiWiFi models and the levels of code that they can run.

Click here for the officially supported Forti OS upgrade path document from Fortinet.

Click here for a list for firmware versions with dates.

Click here to determine if your platform is supported from the product End Of Life information document by Fortinet.

Please use this post to report any CPU/memory additions and/or changes to MAIK. I'm trying to keep this thread short and neat.

Thanks

-Bob

Fortigate

                  | CPU#, speed &|                    |Internal| F I R M W A R E |
    M O D E L    | manufacturer | Memory | C P | N P |Storage |V2.80|V 3|V 4|V 5| introduced
 FGT 20C         |              |        | SoC | SoC |        |     |   | * | * | v4.3.4
 FGT 20C_ADSL    |              |        |     |     |        |     |   | * | * | v4.3.11
 FGT 30B         |              |        | N/A | N/A |        |     | * | * |   | v3.6.3
 FGT 30D         |   1 FortiSOC2| 1024 MB| SoC | SoC |  4GB CF|     |   |   | * | v5.0.4
 FGT 40C         |     1 FA526id|  512 MB| SoC | SoC |  4GB CF|     |   | * | * | v4.3.4
 FGT 50A         |              |        |     |     |        |  *  | * |   |   | before v2.80 MR 12
 FGT 50AM        |              |        |     |     |        |  *  |   |   |   | before v2.80 MR 12
 FGT 50B         | 1 AMD@431 MHz|  256 MB| CP6 | N/A |        |     | * | * |   | before v3 MR 3
 FGT 51B         | 1 AMD@431 MHz|  512 MB| CP6 | N/A |  1GB CF|     | * | * |   | before v3 MR 3
 FGT 60          | 1 VIA@400 MHz|  128 MB| CP5 | N/A | 30MB CF|  *  | * |   |   | before v2.80 MR 12
 FGT 60ADSL      |              |        |     |     |        |     | * |   |   | before v3 MR 3
 FGT 60B         | 1 VIA@400 MHz|  256 MB| CP6 | N/A | 64MB CF|     | * | * |   | v3.5.2
 FGT 60C(rev 1-3)|  1 FA@524 MHz|  512 MB| SoC | SoC |        |     |   | * | * | v4.2.2 (v2 & v3 have 8GB CF storage)
 FGT 60C(rev 4)  |  1 FA@524 MHz| 1024 MB| SoC | SoC |  8GB CF|     |   | * | * | after v4.2.2
 FGT 60C_POE     |              |        |     |     |        |     |   | * | * | v4.3.11
 FGT 60C_SFP     |              |        |     |     |        |     |   |   | * | v5.0.6
 FGT 60D         |  1 FA@800 MHz| 2048 MB| SoC | SoC | 16GB CF|     |   |   | * | v5.0.1
 FGT 60D_POE     |  1 FA@800 MHz| 2048 MB| SoC | SoC | 16GB CF|     |   |   | * | v5.0.5
 FGT 60M         |              |        |     |     |        |  *  | * |   |   | before v2.80 MR 12
 FGT 70D         |              |        |     |     |        |     |   |   | * | v5.2
 FGT 80C(rev 1)  |  1 IC@600 MHz|  512 MB| CP6 | N/A |        |     | * | * | * | v3.7.4
 FGT 80C(rev 2)  |  1 IC@600 MHz| 1024 MB| CP6 | N/A |        |     | * | * | * | after v3.7.4
 FGT 80CM(rev 1) |  1 IC@600 MHz|  512 MB| CP6 | N/A |512MB CF|     | * | * | * | v3.7.4
 FGT 80CM(rev 2) |  1 IC@600 MHz| 1024 MB| CP6 | N/A |  8GB CF|     | * | * | * | after v3.7.4
 FGT 82C         |  1 IC@600 MHz|  512 MB| CP6 | N/A | 1TB HDD|     | * | * |   | v3.7.7
 FGT 90D         |1 ARM9@900 MHz| 2048 MB| SoC | N/A | 32GB CF|     |   |   | * | v5.0.3 (1)
 FGT 90D_POE     |1 ARM9@900 MHz| 2048 MB| SoC | N/A | 32GB CF|     |   |   | * | v5.0.4 (1)
 FGT 94D_POE     |              |        |     |     |        |     |   |   | * | v5.0.8
 FGT 100         |              |        |     |     |        |  *  | * |   |   | before v2.80 MR 12
 FGT 100A        |  1 IC@400 MHz|  256 MB| CP5 | N/A | 64GB CF|  *  | * | * |   | before v2.80 MR 12

                 | CPU#, speed &|                    |Internal| F I R M W A R E |
    M O D E L    | manufacturer | Memory | C P | N P |Storage |V2.80|V 3|V 4|V 5| introduced
 FGT 100D (rev 1)|  1 IA@1.8 GHz| 2048 MB| CP8 | N/A |16GB SSD|     |   | * | * | v4.3.4 (1) (RJ-45 only)
 FGT 100D (rev 2)|  1 IA@1.8 GHz| 4096 MB| CP8 | N/A |16GB SSD|     |   | * | * | v4.3.4 (1) (2 SFP ports)
 FGT 100D (rev 3)|  1 IA@1.8 GHz| 4096 MB| CP8 | N/A | 32GB CF|     |   | * | * | v4.3.4 (1) (2 SFP ports)
 FGT 110C        |  1 IC@600 MHz| 1024 MB| CP6 | N/A |        |     | * | * | * | v3.6.4
 FGT 111C        |              |        | CP6 | N/A |        |     | * | * | * | v3.7.5
 FGT 140D        |              |        |     |     |        |     |   |   | * | v5.0.3
 FGT 140D_POE    |  4 IA@1.8 GHz| 3959 MB| CP8 |     |  2GB CF|     |   |   | * | v5.0.3
 FGT 140D_POE_T1 |              |        |     |     |        |     |   |   | * | v5.0.3
 FGT 200         |  1 IC@300 MHz|  256 MB| N/A | N/A | 64MB CF|  *  | * |   |   | before v2.80 MR 12 (optional 40GB HDD)
 FGT 200A        |  1 IC@400 MHz|  512 MB| CP5 | N/A | 64MB CF|  *  | * | * |   | before v2.80 MR 12 (optional HDD)
 FGT 200B        |  1 IC@1.2 GHz| 1024 MB| CP6 | NP2 |  4GB CF|     |   | * | * | before v4.1.10
 FGT 200B_POE    |  1 IC@1.2 GHz| 1024 MB| CP6 | NP2 |  4GB CF|     |   | * | * | before v4.1.10
 FGT 200D        |  2 IC@2.5 GHz| 2048 MB| CP8 |     | 16GB CF|     |   |   | * | v5.0.3 (1)
 FGT 224B        |              |        |     |     |        |     |   | * |   | v4.0.0
 FGT 240D        |  1 IX@2.0 GHz| 2048 MB| CP8 | NP4 | 32GB CF|     |   |   | * | v5.0.3 (1)
 FGT 240D(rev 2?)|  2 IC@2.5 GHz| 4096 MB| CP8 | NP4 | 32GB CF|     |   |   | * | v5.0.3 (1)
 FGT 280D_POE    |              |        |     |     |        |     |   | * |   | v5.0.5
 FGT 300         |              |        |     |     |        |  *  | * |   |   | before v2.80 MR 12 (optional HDD)
 FGT 300A        |  1 IC@2.0 GHz|  512 MB| CP5 | N/A |122MB CF|  *  | * | * |   | before v2.80 MR 12 (optional HDD)
 FGT 300C        |  1 IC@2.0 GHz| 2048 MB| CP6 |2xNP2| 32GB CF|     |   | * | * | v4.2.9 (1)
 FGT 310B        |  1 IC@2.0 GHz| 1024 MB| CP6 |2xNP2|        |     | * | * | * | v3.6.1
 FGT 310B_DC     |              |        |     |     |        |     | * | * | * | v3.7.6
 FGT 311B        |  1 IC@2.0 GHz| 1024 MB| CP6 |2xNP2|        |     | * | * | * | v3.7.6
 FGT 400         |              |        |     |     |        |  *  | * |   |   | before v2.80 MR 12
 FGT 400A        |  1 I4@2.8 GHz|  512 MB| CP5 | N/A | 64MB CF|  *  | * | * |   | before v2.80 MR 12 (optional HDD)
 FGT 500         |              |        |     |     |        |  *  | * |   |   | before v2.80 MR 12
 FGT 500A        |  1 P4@2.8 GHz| 1024 MB| CP5 | N/A |128MB CF|  *  | * | * |   | before v2.80 MR 12 (optional HDD)
 FGT 600C        |1 II3@3.07 GHz| 4096 MB| CP8 | NP4 | 64GB CF|     |   | * | * | v4.3.14 (1)
 FGT 620B        |  2 I2@1.8 GHz| 2048 MB| CP6 |4xNP2|        |     | * | * | * | v3.7.1
 FGT 620B_DC     |              |        |     |     |        |     |   | * | * | v4.1.1

                 | CPU#, speed &|                    |Internal| F I R M W A R E |
    M O D E L    | manufacturer | Memory | C P | N P |Storage |V2.80|V 3|V 4|V 5| introduced
 FGT 621B        |              |        | CP6 |4xNP2|        |     |   | * | * | v4.2.3
 FGT 800         |  1 IM@1.6 GHz| 1024 MB| CP4 | N/A |128MB CF|  *  | * | * |   | before v2.80 MR 12 (optional 80GB HDD)
 FGT 800C        |4 II5@2.67 GHz| 8192 MB| CP8 | NP4 | 64GB CF|     |   | * | * | v4.3.8 (1)
 FGT 800F        |              |        |     |     |        |  *  | * | * |   | before v2.80 MR 12
 FGT 1000        |  1 I3@1.26GHz|  512 MB| CP2 | N/A |        |  *  | * |   |   | before v2.80 MR 12 (optional 40GB HDD)
 FGT 1000A       |  2 IX@3.2 GHz| 1024 MB| CP5 | N/A |128MB CF|  *  | * | * |   | before v2.80 MR 12
 FGT 1000A_LENC  |              |        |     |     |        |     | * | * |   | before v3 MR 3
 FGT 1000AFA2    |  2 IX@3.2 GHz| 1024 MB| CP5 | NP1 |128MB CF|     | * | * |   | before v3 MR 3
 FGT 1000C       |4 II5@2.67 GHz| 8192 MB| CP8 | NP4 |128GB CF|     |   | * | * | v4.3.2 (1)
 FGT 1240B       |  4 IX@2.0 GHz| 3096 MB| CP6 |2xNP4| 64GB CF|     | * | * | * | v3.7.8 (384 GB max) (1)
 FGT 1240B       |  4 IX@2.0 GHz| 6144 MB| CP6 |2xNP4| 64GB CF|     | * | * | * | v4.3.1 or later, 64 bit OS (384 GB max) (1)
 FGT 1500D       |              |        | CP8 | NP6 |        |     |   |   | * | new entry 12/2013
 FGT 3000        |              |        |     |     |        |  *  | * |   |   | before v2.80 MR 12
 FGT 3016B       |              |        | CP6 |4xNP2|        |     | * | * | * | before v4.1.10
 FGT 3040B       | 8 IX@2.53 GHz|12288 MB|     |     | 64GB CF|     |   | * | * | v4.2.3 (256 GB max) (1)
 FGT 3140B       |  4 IX@2.0 GHz|12288 MB| CP7 |2xNP4| 64GB CF|     |   | * | * | v4.2.6 (256 GB max) (1)
 FGT 3240C       | 16 IX@2.4 GHz|12288 MB| CP8 |2xNP4| 64GB CF|     |   | * | * | v4.3.12 (1)
 FGT 3600        |  4 IX@2.4 GHz| 2048 MB|     |     |        |  *  | * | * |   | before v2.80 MR 12
 FGT 3600A       |              |        |     |     |        |     | * | * |   | before v3 MR 3
 FGT 3600C       | 32 IX@2.4 GHz|29960 MB| CP8 |     |60GB HDD|     |   |   | * | v5.0.2 (1)
 FGT 3700D       |              |        |     | NP6 |        |     |   |   | * | new entry 12/2013
 FGT 3810A       | 4 AMD@1.8 GHz| 3532 MB| CP6 | NP1 |        |     | * | * | * | v3.5.1
 FGT 3950B(rev 1)|              |12288 MB| CP7 | NP4 |256GB CF|     |   | * | * | v4.2.4 (1)
 FGT 3950B(rev 2)|12 IX@3.47 GHz|24576 MB| CP7 | NP4 |256GB CF|     |   | * | * | after v4.2.4 (1)
 FGT 3951B       |              |        | CP7 | NP4 |        |     |   | * | * | v4.2.4
 FGT 5001        |  4 IX@2.0 GHz| 2048 MB|     |     |        |  *  | * | * |   | before v2.80 MR 12
 FGT 5001A       |              |        | CP6 | N/A |        |     | * | * | * | v3.6.3
 FGT 5001B       |              |        | CP7 |2xNP4|128GB CF|     |   | * | * | v4.2.5
 FGT 5001C       |              |        |     |     |        |     |   |   | * | v5.0.2 (1)
 FGT 5001FA2     |              |        |     |     |        |     | * | * |   | before v3 MR 3

                 | CPU#, speed &|                    |Internal| F I R M W A R E |
    M O D E L    | manufacturer | Memory | C P | N P |Storage |V2.80|V 3|V 4|V 5| introduced
 FGT 5002FB2     |              |        |     |     |        |  *  |  *  |  *  |     | before v2.80 MR 12
 FGT 5005FA2     | 4 AMD@1.8 GHz| 3538 MB|     |     |        |     |  *  |  *  |     | before v3 MR 3
 FGT 5101C       |              |        |     |     | 64GB CF|     |   |   | * | v5.0.0 (1)
 FGT VM32        |              |        |     |     |        |     |   | * | * | v4.3.0
 FGT VM64        |              |        |     |     |        |     |   | * | * | v4.3.2
 FGT VM64_HV     |              |        |     |     |        |     |   |   | * | v5.0.5
 FGT VM64_KVM    |              |        |     |     |        |     |   |   | * | v5.0.5
 FGT VM64_XEN    |              |        |     |     |        |     |   | * | * | v4.3.5

Fortiswitch
                  | CPU#, speed &|                    |Internal| F I R M W A R E |
    M O D E L    | manufacturer | Memory | C P | N P |Storage |V2.80|V 3|V 4|V 5| introduced
 FSW 5203B       |              |        |     |     |        |     |   | * | * | v4.3.4

FortiWiFi
                  | CPU#, speed &|                    |Internal| F I R M W A R E |
    M O D E L    | manufacturer | Memory | C P | N P |Storage |V2.80|V 3|V 4|V 5| introduced
 FWF 20C         |              |        | SoC | SoC |        |     |   | * | * | v4.3.4
 FWF 20C_ADSL    |              |        |     |     |        |     |   | * | * | v4.3.11
 FWF 30B         |              |        | N/A | N/A |        |     | * | * |   | v3.7.7
 FWF 30D         |              |        |     |     |        |     |   |   | * | v5.0.4
 FWF 40C         |              |        | SoC | SoC |        |     |   | * | * | v4.3.4
 FWF 50B         | 1 AMD@431 MHz|  256 MB| CP6 | N/A |        |     | * | * |   | before v3 MR 3
 FWF 60          | 1 VIA@400 MHz|  128 MB| CP5 | N/A |        |  *  | * |   |   | before v2.80 MR 12
 FWF 60A         | 1 VIA@400 MHz|  128 MB|     |     |        |     | * |   |   | before v3 MR 3
 FWF 60AM        | 1 VIA@400 MHz|  128 MB|     |     |        |     | * |   |   | before v3 MR 3
 FWF 60B         | 1 VIA@400 MHz|  256 MB| CP6 | N/A | 64MB CF|     | * | * |   | v3.6.3
 FWF 60C(rev 1-3)|  1 FA@524 MHz|  512 MB| SoC | SoC |        |     |   | * | * | v4.2.2 (v2 & v3 have 8GB CF storage)
 FWF 60C(rev 4)  |  1 FA@524 MHz| 1024 MB| SoC | SoC |  8GB CF|     |   | * | * | after v4.2.2
 FWF 60CM        |              |        | SoC | SoC |        |     |   | * | * | v4.2.6
 FWF 60CX_A      |              |        | SoC | SoC |        |     |   | * | * | v4.2.8
 FWF 60D         |  1 FA@800 MHz| 2048 MB| SoC | SoC | 16GB CF|     |   |   | * | v5.0.1
 FWF 80CM(rev 1) |  1 IC@600 MHz|  512 MB| CP6 | N/A |512MB CF|     | * | * | * | v3.7.4
 FWF 80CM(rev 2) |  1 IC@600 MHz| 1024 MB| CP6 | N/A |  8GB CF|     | * | * | * | after v3.7.4
 FWF 81CM        |              |        |     |     |        |     | * | * | * | v3.7.7
 FWF 90D         |1 ARM9@900 MHz| 2048 MB| SoC | N/A |        |     |   |   | * | v5.0.3 (1)
 FWF 90D_POE     |1 ARM9@900 MHz| 2048 MB| SoC | N/A |        |     |   |   | * | v5.0.5


Models in red indicate that the unit is not supported under firmware version 4.
Models in brown indicate that the unit is not supported under firmware version 5.

CPU Notes:
FA = FA526id(wb) rev 1 (v4l) FortiSOC (Fortinet)
I2 = Intel Core 2 Duo
I3 = Intel Pentium III
I4 = Intel Pentium 4
IA = Intel Atom
IC = Intel Celeron (Covington)
II3 = Intel Core i3
II5 = Intel Core i5
IM = Intel Mobile
IX = Intel Xeon

Other notes:
CP: Content Processor
NP: Network Processor
SoC: System on a Chip

(1) from Fortinet product matrix - October 2013
post edited by rwpatterson - 2016/03/04 05:00:53

-Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

-4.3.19-b0694
FWF60B
FWF80CM (4)
FWF81CM (2)
 
#1

12 Replies Related Threads

    rwpatterson
    Expert Member
    • Total Posts : 8359
    • Scores: 197
    • Reward points: 0
    • Joined: 2006/08/08 10:08:18
    • Location: Long Island, New York, USA
    • Status: offline
    RE: FGT platforms with CPU, memory and supported firmware 2014/06/14 06:00:52 (permalink)
    0
    Updated 2014-0614
    Added FGT70D (5.2)

    Updated 2014-0506
    Added FGT60C_SFP (v5.0.5) and FGT94D_POE (v5.0.6)

    Updated 2014-0125:
    Corrected starting firmware date for FWF81CM

    Updated 2013-1228:
    Added: 1500D, 3700D <- see links
    Corrected: 200D, 3600C, 140D-POE, 240D, 90D, 200B-POE

    Updated 2014-0318:
    Updated 40C memory
    Corrected 100d rev 2&3 drive type

    Updated 2014-0410:
    Added FGT 60D_POE
    Added VM64_HV
    Added VM-KVM
    Added FWF 90D_POE
     
    Updated 2016-0304:
    Corrected link for upgrade path document.

    NO LONGER BEING MAINTAINED - RWP
    post edited by rwpatterson - 2016/03/04 06:30:25

    -Bob - self proclaimed posting junkie!
    See my Fortigate related scripts at: http://fortigate.camerabob.com

    -4.3.19-b0694
    FWF60B
    FWF80CM (4)
    FWF81CM (2)
     
    #2
    rwpatterson
    Expert Member
    • Total Posts : 8359
    • Scores: 197
    • Reward points: 0
    • Joined: 2006/08/08 10:08:18
    • Location: Long Island, New York, USA
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2014/10/26 20:32:38 (permalink)
    0
    p****oni
    We will need rebuild the tables with new forum layout  :(


    Wow... be careful what you ask for. This new forum software is for the birds. Looks all shiny and new, but the content can't be expressed in a nice, usable manner (in my opinion). Also it now takes far too long with this javascript/AJAX (whatever) interface to get anything intricate done in any timely manner. I just spent 30 minutes waiting for the screen to refresh just to see my changes... Bleah... Epic fail.... I'm going to bed. I'll have to look for the links to my former posts later... They got broken as well. When I finally get to them, I'll probably have to spend another evening repairing them.

    -Bob - self proclaimed posting junkie!
    See my Fortigate related scripts at: http://fortigate.camerabob.com

    -4.3.19-b0694
    FWF60B
    FWF80CM (4)
    FWF81CM (2)
     
    #3
    pcraponi
    Gold Member
    • Total Posts : 451
    • Scores: 24
    • Reward points: 0
    • Joined: 2006/07/28 11:43:39
    • Location: Brazil
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2014/10/27 08:00:27 (permalink)
    0

    Wow... be careful what you ask for. This new forum software is for the birds. Looks all shiny and new, but the content can't be expressed in a nice, usable manner (in my opinion). Also it now takes far too long with this javascript/AJAX (whatever) interface to get anything intricate done in any timely manner. I just spent 30 minutes waiting for the screen to refresh just to see my changes... Bleah... Epic fail.... I'm going to bed. I'll have to look for the links to my former posts later... They got broken as well. When I finally get to them, I'll probably have to spend another evening repairing them.




    It's better now... I have a backup too... I'll delete my post to cleanup...
     
    PS: I've added 500D on original post to update here. I can obtain information of all Fortigate devices now... I'll post the info to complete the table.
    post edited by pcraponi - 2014/10/27 08:01:53
    #4
    tuumke
    Bronze Member
    • Total Posts : 35
    • Scores: 0
    • Reward points: 0
    • Joined: 2015/05/07 03:59:43
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2015/10/29 23:40:54 (permalink)
    0
    Looking for 92D cpu specs... anyone? 
    -edit-
    Did find 92D Wifi specs on the other thread:
    Intel(R) Atom(TM) CPU D525 @ 1.80GHz

    Can any1 confirm if this is the same for 92D?
    post edited by tuumke - 2015/10/29 23:46:44
    #5
    sagelike
    New Member
    • Total Posts : 7
    • Scores: 0
    • Reward points: 0
    • Joined: 2015/12/02 18:43:16
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2015/12/24 09:03:52 (permalink)
    0
    Hi there,
     
    Just looking for a little clarification on the 80C which chart above shows above as using Intel Covington CPU at 600mhz however the Covington specs out at 300mhz which means it's overclocked or using something else.
     
    https://en.wikipedia.org/wiki/Celeron#Covington
     
    Maybe it's using the mobile Coppermine CPU?
     
    http://www.cpu-world.com/Compare/321/Intel_Celeron_266_MHz_%28BX80523R266000%29_vs_Intel_Mobile_Celeron_600_MHz_%28KP80526NY600128%29.html
     
    I am looking at purchasing the 80C (rev 2) but the Covington CPU has very poor specs - no L2 cache, etc. which makes me wonder if it can hit its specified ratings or experiences other performance bottlenecks.

    I am a small web hoster and am considering using one of these to replace a 60C which works well but would like more firewall throughout and the ability to pick up new sessions faster. I also won't be using IPS, web filtering, ant-spam or any of the other enterprise feature. This will be used strictly for firewall and NATing.
     
    Maybe I should stick with 60C (rev4) with 1GB RAM?

    Anyone know more about the 80C or can provide more insight?
     
    Thanks in advance!
    G
    post edited by sagelike - 2015/12/24 09:09:13
    #6
    hector_yason
    New Member
    • Total Posts : 1
    • Scores: 0
    • Reward points: 0
    • Joined: 2016/06/07 03:20:32
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2016/06/07 05:06:07 (permalink)
    0
    Hi,
     
    Good day. I was wondering what the memory is on an FG600D.
     
    I gathered that the 400D and 500D have 8GB. I'm just trying to compare the three units.
     
    Thanks!
    #7
    ede_pfau
    Expert Member
    • Total Posts : 5929
    • Scores: 466
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2016/06/07 06:40:52 (permalink)
    0
    FG-600D has 8 GB as well (source: FTNT SE)

    Ede

    " Kernel panic: Aiee, killing interrupt handler!"
    #8
    Alex_l
    Bronze Member
    • Total Posts : 38
    • Scores: 0
    • Reward points: 0
    • Joined: 2016/05/20 01:37:50
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2016/07/29 16:29:03 (permalink)
    0
    Have someone FG-60E? Very hope that they place at last good multi core CPU in new SOC3 version. No freeze as at classical SOC2-only design like models below 100D. May be DEV write here some info?

    FG-50E/60D/60E, FAP-221B/21D, FortiClient. 
    #9
    hklb
    Gold Member
    • Total Posts : 233
    • Scores: 29
    • Reward points: 0
    • Joined: 2014/06/10 15:00:59
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2017/04/19 10:22:18 (permalink)
    0
    Hi,
     
    Is someone has the characteristic for the FGT600D ?
     
    Lucas
    #10
    MikePruett
    Platinum Member
    • Total Posts : 677
    • Scores: 17
    • Reward points: 0
    • Joined: 2014/01/08 19:39:40
    • Location: Montgomery, Al
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2017/04/19 10:57:24 (permalink)
    0
    This original post is phenomenal. Would rock to get an updated one.

    Mike Pruett
    Fortinet GURU
    #11
    Steve Fuller
    Bronze Member
    • Total Posts : 24
    • Scores: 0
    • Reward points: 0
    • Joined: 2009/08/27 12:46:10
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2018/06/07 15:26:30 (permalink)
    0
    That and a sheet giving last supported firmware given amount of memory installed.
    #12
    Steve Fuller
    Bronze Member
    • Total Posts : 24
    • Scores: 0
    • Reward points: 0
    • Joined: 2009/08/27 12:46:10
    • Status: offline
    Re: FGT platforms with CPU, memory and supported firmware 2019/04/19 15:13:22 (permalink)
    0
    From diag hard sys mem and diag hard sys cpu
    30D mem 951,416 mips 799.53
    60D mem 1,883,936 mips 799.53
    30E mem 1,031,172 mips 2662.4 Memory Available Same Config on FWF not in production, no UTM after initial boot
    5.4.4  609,064 56.2 735,368 5.6.6 701,340 5.6.8 697,396
    50E 2,073,096 mips 3188.32
    60E 1,911,804 mips 2007x3 6021
    80E 1,911,864  mips 2007x3 6021


    post edited by Steve Fuller - 2019/04/19 15:15:37
    #13
    Jump to:
    © 2019 APG vNext Commercial Version 5.5