pppoe on both wan interface

[rajeevb]

I have the PPPOE working fine for wan2 interface, the moment i connect wan1, the internet cable, wan2 is getting disconnected and connect again in every 1 min interval. seems to be a strange issue.......when i remove the wan1 cable the operation is normal. can some one help here please ?

[Fullmoon]

what fortigate model and firmware version if you dont mind. thanks

[Tannv]

Have you resolved the issue? I have same problem. I am using both Fortigate 60C model

[Ralph1973]

check what distance is used to the gateway. I have a customer with wan1 fiber connection and wan2 pppoe Wan2 has distance of 5 (automatically configured) and therefore you may have to adjust the distance of wan1 to its gateway, otherwise the unit only uses 1 gateway (until the other one goes down) You can check this in CLI: conf sys inter sh full Regards, Ralph Willemsen