Hi there, Trying to make 2FA /SSO easy for users, using one technology.
I know its possible to integrate Duo 2FA with Fortigate for challenged
Forticlient access.Anyone know if this is possible for OKTA ? (Seen
FortiAuthenticator docs but have not se...
Hi all We have a site with a FG 60D with a few FP221c'sThe FGT is
running version 5.4.1 build 5447 Users are complaining that they are
having intermittent wireless connectivity issues.They noted the
following The wireless remains connected, but acces...
Hi All, We have noticed a performance issue with FortiAP's e.g 221C's
when pinging a server on the internal network. We are seeing erratic
ping response times from laptops or other mobile devices pinging devices
on other networks. (both internal and ...
Users complained about slow internet page loads.DNS lookups looked fine,
ping replys all good. Users on a specific subnet had this issue, only
difference was botnet detection was turned on for that interface.Looks
like the page started its initial lo...
Hi all We have a site running 5.2.1 (HA a/a)We have device detection
enabled and it works, we also have the FSSO agent on AD.Devices listed
show the MAC, OS and logged in user for windows devices.However, it
sometimes shows the same user as being log...
Just wondering does anyone have any issue with users reporting that
Forticlient is blocking access to public wifi such as hotel captive
portals ? We also have EMS managing Forticlient profiles, but during
testing, some users complained that they cann...
No problem From the command output # diag wireless-controller wlac -c
wtp we saw the following type of errors last failure : 14 -- ECHO REQ is
missing and this is repeated across a few sites despite the fact that
there was little or no traffic on the...
Hi Eti We have made a few changes that fixed this issue for us on a few
sites. (Item 3 below is the biggest problem) 1. Make sure your country
is set to the appropriate country Fortigate # config wireless-controller
setting Fortiage (setting) # show ...
Hi all Just wanted to give some feedback here. The issue in this case
appears to be related to the incorrect country code set on the AP's.A
global country code setting was applied, but perhaps it was not before
the AP's were connected/ detected by th...
