Hi girls and guys, I'm searching for a communication matrix where I can
see which ports/protcols/destinations the FortiClient uses/needs when
using Sandbox Cloud. Within a long Google search I've found a ton of
articles that all mention different por...
Hi guys and girls, we're using PRTG to monitor our and the customers
environments.At the current time we're using shell scripts to monitor
the HA status of a FGT cluster via SSH. I'd like to switch over to SNMP,
because shell scripts use a high amoun...
Hi together, this is my first question to the forum and I'll try to be
as informational as possible.Our problem is that some users can't surf
after their first logon into windows or after changing the network (for
example from LAN to WLAN) until they...
Hi there,solved the problem with the missing sync. It was a layer 1
problem. ;) Switch the DSL cables and the connect works fine now. Sadly
the 60E DSL-J seems to not support "supervectoring". After the
successful connect I had only 20 mbit downstrea...
Hi together, I am having a FGT 60E DSL-J at home and I am trying to
establish a DSL connect with the "Deutsche Telekom".I've set the DSL
interface to DHCP and configured a PPPoE VLAN on the DSL Interface with
my login credentials for my ISP and the V...
Hi Andy, just took a look at your reply.You're referencing on a FGT with
Sandbox Cloud licensed. Regarding the KBs a FGT is using the FortiGuard
servers for updating and/or FortiSandbox Cloud.But what is with the
FortiClient? Customers are most of th...
Hi Andy, thanks for your fast reply.I've found that article too. In my
eyes the article describes the communication with FortiSandbox on-prem.
Because of that the KB isn't matching for FortiSandbox Cloud. What do
you think? Kind regards,Dominik
