Hi Guys, I am Ernest and new to Fortigate. I have two LANs in my network
( 192.168.0.0/16 and 172.20.0.0/16) There is routing defined in the core
between these two LANs which allows access to services and applications
on either side . My Fortigate Fi...
Dear All, My company recently purchased a new FG 200E, my first
Fortigate Box . I am having a challenge getting the box to work . My
traffic flows from the internal network through through the
192.168.5.1/255.255.255.0 on the LAN interface (port1) wi...
Hi Shawn, The connection now works after restarting the box. A bit
strange it took a reboot to take effect but its working now. Your advice
has been eye-opening and I am grateful for the support. Thanks.
HI Shawn, I have defined that subnet in the tunnel . Also internet is
accessible in that range but internet traffic exits on a different
device not the FG. I am not able to ping the fw internal lan IP from a
device in that range.
Hi Shawn, Thanks for the response. I have enabled split tunneling, Also
I created a static route via the LAN interface to the 172.20.0.0 network
and created a policy allowing SSL VPN access to both networks. I am
however only able to reach the 192.16...
Hi Guys, Thanks so much for your input. I would like to inform you that
following your recommendations I was able to get the box up and running
fully. The only question I have to ask now is, with Forti OS 6.2.3 how
are device policies configured ? be...
