Most Liked Posts Recent Solutions
No Content Available

User Activity

I used the following VIP config to perform a PAT (without NAT) on 5.x;edit "vip-10.1.2.1-tcp2022" set src-filter "172.17.2.1" "172.18.1.14" set extip 10.1.2.1 set extintf "any" set arp-reply disable set portforward enable set mappedip "10.1.2.1" set ...
Hi All, As i start upgrading Fortigates, i'll be in an interim configuration where some of the firewalls are on 5.6, but the ADOM is still on 5.4. What limitations are there in this configuration? Is it still possible to provision new VDOMs on a 5.6 ...
Its time to start my first significant round of Fortigate upgrades and am looking for tips and tricks from those that have done many. I'm using the following as a starting point; https://kb.fortinet.com/k...=FD35329&sliceId=1 Assumption - Firmware up...
I'm adding an SSID to a VDOM, and when i click OK i can see 5 messages flash up on the screen but there's gone before i can read them. Is there some other way i can read these messages?
Fortigate 5.4.5 needs to PAT (or not) based on source IP address.host-1.1.1.1 needs to connect to 10.0.49.1 port 22 and be pushed through as is to 10.0.49.1 port 22 host-2.2.2.2 needs to connect to 10.0.49.1 port 22 but be PATed so that the connectio...