The upgrade path from 7.2.5 is to first go to 7.2.7 then to 7.2.8.What
is actually happening during the 7.2.7 upgrade that it is required as
part of the process?
fortiAfter upgrading to 7.4.3 my 1100E is doing something wrong when
answering requests for ifoutoctets on ipsec interfaces.Occassionaly
Delta for out octets is way too high which shows an ipsec tunnel on a
40Gig interface at 90+ percent utilization ...
I upgraded a firewall from 7.2.5 to 7.4.2 then 7.4.3 following the
upgrade path for an 1100E.Now all users are complaining about randomly
getting their sessions dropped. This does not happen on our 7.2.X ztna
gateways. diag wad user list shows the us...
Does anyone ever get a popup that just counts down and to nothing and
you cannot connect to any ztna destinations. I normally get the popup
once, do my SAML authentication, along with MFA against the
fortiauthenticator. Then everything works and I a...
I added a wildcard ztna destination. *.domain.com:3389When I do
nslookups I get the VIP address for every host I try to connect to in
that domain. When trying to connect via RDP nothing happens with the
fortclient. The fortitcs log doesn't show anyth...
Did you see my post before this? It wasn't on one of the 40G interfaces.
It was 4x 10g interfaces in an LACP aggregate. The aggregate was the
source of the ipsec tunnel.The utilization reported just fine on the
aggregate. The ipsec interface utilizat...
Thank you for the response.Can I get a staff members verification on
this?Does 7.2.7 provide some type of system update that is not available
if moving from 7.2.5 to 7.2.8. If it is... what exactly is being
updated?
You need to follow the links. Only NP7 offloads ipsec on a
loopback.https://community.fortinet.com/t5/FortiGate/Technical-Tip-Information-about-IPsec-on-loopback-interface-and/ta-p/208677https://docs.fortinet.com/document/fortigate/7.4.3/hardware-acc...
