Hi,I am new here and my english is not the best but i will do my best.I
need help please. I have one fortiwifi 40c. It runs in wifi client mode
and connect it to a WLAN (it´s not a FortiAP its is a Cisco WLAN AP)
because i have no lan connection in t...
I have solved the Problem. Now it´s possible to print from the Client PC
(192.168.10.10) on the printer in the subnet 192.168.88.0/24. I have set
under firewall objects, virtual ips witch are forwarding the raw port
9100 incoming traffic wifi (extern...
Hi,Now I have set the policy. The IP of the internal Port (LAN) is
192.168.88.254 and dhcp is enabled for Devices wich are connected to the
internal ports. Should it be possible then to ping the Fortinet
(192.168.88.254) from the client with the IP 1...
Hello Dave,Thanks for your help. I will set a policy from WLAN interface
to internal LAN (Port1). But I think I have a Problem with the routing.
If I ping the Forti 40c wlan IP 192.168.10.215 from the client notebook
(also in the subnet 192.168.10.10...