I want to setup remote access vpn on my fortigate(v6.2) for both windows
and ios/macos native client.I try templated Windows Native and iOS
Native, both works well respectively.However, when I enable both of
these, only iOS Native will work, and when...
I have two fortigates, and i set up the vpn tunnel following this guide
https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/281288/site-to-site-ipsec-vpn-with-two-fortigates
The clients behind the gateway can ping each other through this tunn...
Hello all,Is LDAP only work with Cisco IPsec but L2TP/IPsec?I try to set
up VPN for remote access with LDAP with is hosted on Synology NAS, It
works well with Cisco IPsec, but when I switch to L2TP/IPsec, only
RADIUS work. I want to use L2TP/IPsec be...
So how did you chose 10.10.10.1 and 10.10.10.2, just randomly pick two
addresses not in the LAN subnet? My real use case is I have a RADIUS
server in HQ subnet, and I want the Branch-FGT to be able to use that
RADIUS. My HQ subnet is 10.5.0.1/16, Bra...
The "NAS" is the LDAP server as well as RADIUS server. It is a Network
Attached Storage with special OS and a lot apps. I have test that diag
command and it works well
My RADIUS is provided by synology NAS as same as the LDAP
server.L2TP/IPsec with RADIUS works good, the problems is L2TP/IPsec
directly with LDAP I config LDAP server form Web GUI "User & Device" ->
"LDAP servers", and create a "User Groups" with typ...
"Cisco IPsec" means the fortigate ipsec tunnel template "iOS Native",
"L2TP/IPsec" means the fortigate ipsec tunnel template "Windows Native".
When "L2TP/IPsec" + RADIUS, vpn will work on iOS, macOS, Window,
Android,When "L2TP/IPsec" + LDAP, vpn does...
