setup site to site vpn using the ipsec wizard. tunnel is already up but
keeps on getting the error "progress ipsec phase 1 negotiate failure" in
vpn events log. need your help where and what to check. note: i
initially setup ssl vpn on the same forti...
UPDATE: from the remote fortigate CLI, i can ping the server behind the
local fortigate. however, i cannot ping the pc behind the remote
fortigate from the CLI of local fortigate. if i ping the server behind
the local fortigate using a pc behind the ...
regarding the config on the KB, it has 2 tunnel interfaces. our setup
only has 1 tunnel interface. sdwan was only used for the default route
for the internet. the tunnel was still bind under wan 1. i tried adding
sd wan rules for the internet and acc...
regarding the sdwan setup for ipsec, our setup shows only 1 tunnel
interface which is under wan1 on the remote fortigate. the config on the
KB shows 2 separate tunnels. both local and remote fortigates are in
production. i'm not sure how to create tw...
Here is the debug from the remote Fortigate: FG100ETK18010728 $ ike 0:
comes REMOTE WAN IP:500->LOCAL WAN IP:500,ifindex=7.... ike 0: IKEv2
exchange=INFORMATIONAL_RESPONSE
id=40699c6066b7a5dc/d7f17ef590733f17:00000001 len=76 ike 0:REMOTE VPN
NAME:13:...