Hello Experts, I am a user of FGT60D which is deployed in proxy-mode as
firewall only. No UTM services.I have not configured anything under
Security Profiles Recently, after upgrading my ISP bandwidth from
120Mbps to 500Mbps I have noticed my FG is n...
Hello,I have FGT 60D (5.4.1) in FW only role. No other features enabled.
Brief config is as follows:[ul]vswitch1 (software switch) = internal1,
internal2 in LAN role.DHCP Server enabled on it.Device Detection
enabled.Active Scanning disabled.Addition...
SOLVEDSo it seems you need to use hardware switch to be able to take
advantage of hardware acceleration. Software switch is CPU intensive and
won't offload traffic to NPU/SPU hw acceleration. Now SPU usage is
visible in Dashboard sessions widget and ...
UPDATE: Ok, I have gathered some more info on this topic.Apparently,
there can be two possible causes of my traffic not being accelerated in
hardware. 1st. I use software switch to have set of vlans spanned on
more than one hardware interface. 2nd.I ...
SOLVED: It was a bug in FortiOS 5.4.1 (and 5.4.3, also 5.4.5) After
upgrade to FortiOS v5.6.2 build1486 (GA) problem disappeared. No changes
to Switch or APs config were made.Upgrades to 5.4.3 build 1111 and 5.4.5
build 1138 did not solve this proble...
Hi emnoc, I will rephrase my situation for clarity. I can connect to LAN
or WLAN (back and forth) as long as I stay connected to service provided
by the same port on FGT, either Internal1 OR Internal2. All is OK, DHCP
& ARP work OK. But in scenario w...
Thanks Dave for your reply, but now I am sure its FGT causing ARP
"problem". To simplify things my network topology is as follows:
FGT:internal1 <-----> Switch <-----> AP1 "ssid:RED"FGT:internal2 <----->
AP2 "ssid:BLUE" FGT reboot.Connecting via AP1 ...
