Hi Guys,Thanks for the Forum it is super helpful and has helped me with
other problems that I have had.For this particular problem I have spent
quite a bit of time reading through the posts on the fortinet forum and
the various cookbooks to find out ...
Not sure if I ever found the correct config on this but the ISP was
accommodating and changed my main WAN subnet to a /29 WAN subnet so I
had the extra IP addresses that I needed. Now I at least have port
forwarding working as I wanted, but just not ...
Thank you very much for the answer. So I thought "could I even make it
work on the current WAN1 address?" and I found that when I set up port
forwarding to the WAN1 address of 12.12.12.230 it worked straight away
and I could SSH in!So at least I was ...
Thank you Toshi for the fast answer!So not assigning additional subnet
to the WAN1 makes sense and I removed this.Then should I assign a LAN
inside with the IP address 5.5.5.225/29 and the server that I am trying
to port forward to the address of 5.5...
