Hi all, I have a working VPN where the HQ end is configured with a
Static IP Address for the remote Branch Office. I want to change it to
Dialup User since the Branch Office will now have a link with a
non-static IP Address. I don't want to have some...
The Radius Server is correctly setup on the Fortigate, and can pass both
the Connection Status and User Test It seems that we have missed
something to tell the Fortigate that if a user is not found locally,
that it should then look at a remote Radius...
When running the command "get router info bgp neighbor 1.1.1.1
received-routes" I get an error "% Inbound soft configuration not
enabled". How do I fix this ?
Hi all, I'm running 2 x VPNs between our HQ site (2 separate devices and
two IPS's) and a remote site (Single FTG). Both VPN's are up and
perfect. The Primary site runs eBGP and routes are being advertised in
both directions (with an AD of 20). We ar...
Hi all, We have two HA Pairs of FW's in separate locations, for fully
resilient access to a core network. Currently, Site A has a bunch of
FortiToken Licenses while Site B has another bunch. Is there any way of
being able to use the same FortiToken c...
Thanks for that So on the Fortigate, is the key to this in defining a
group name "exactly" the same as the FAC usergroup ? I'm sure we tried
this. So there definitely isn't some setting somewhere that needs to be
set to tell the Fortigate to forward ...
Thanks for the reply Ken, So on my HQ, I have done "get router info
routing-table all" but the routes are not there. I should be seeing the
routes with a [200/0] AD. When I ran the same command on the Primary VPN
unit, I got the routes correctly with...
