Hello, I have the following policy: config firewall policy edit 56 set
uuid a497a8c0-e751-51e8-a83e-2d7a00d741ce set srcintf "NOCSWITCH" set
dstintf "Interconnect" set srcaddr "all" set dstaddr "all" set action
accept set schedule "always" set servic...
Hi, I don't seem to be able to ssh a FG100D. I think it used to work
before, but I'm not sure. I'm not the only one touching the
configuration of this firewall. Interestingly, https gets connected from
a neighboring FG101E (IP = 10.248.1.1), but not ...
Hi, does FortiOS support 5.6 support Integrated Routing and Bridging
(IRB)? For the ones not familiar with the concept (like I was until
yesterday), here is a link that gives an easy-to-understand example:
http://cisconet.com/lanman/lan-general/552-h...
OK, I found my mistake: the loopback interface of the firewall had an
incorrect mask (10.240.0.2/31), which made it overlap with the
10.240.0.3 that I was trying to reach from 10.0.8.11, and this clearly
(and to some extent understandably) confused t...
Hi Dave, thanks for your message. "All" indeed is the default 0.0.0.0/0:
config firewall address edit "all" set uuid
bcdc519a-68c7-51e4-3bb3-1ae9963b0092 next end which includes 10.0.8.11,
which is the host from where the dropped traffic comes: confi...