Hello, I was wondering if anyone has had any experience with setting up
a dial-up Microsoft VPN (L2TP/IPsec) VPN with a loopback interface
instead of specifying a physical WAN interface? My configuration:
L2TP:config vpn l2tpset eip 192.168.55.250set...
Hello, I was wondering if anyone may be able to assist with an ongoing
issue I'm experiencing with a client. The client has an internal PBX
system and a SIP trunk from a third party which originally had issues
with inbound RTP working. I've gone ahea...
Hi Hahu, Couldn't get it working utilising a loopback IP address. Packet
captures on the FortiGate showed communication between the remote client
and loopback address going back and forth over the relevant ports but
never established successfully. Du...
Hi, Did you implement the sub-VLAN interface on the FortiGates with VLAN
ID 20 or simply configure the network on the physical port itself? Is
the trunk/tagged link on your Cisco switch using VLAN 20 as the native
VLAN? Check ARP is resolving "get sy...
