Reports started rolling in on Monday, 22 April 2024, at approximately
07:00 AWST (Sunday, 21 April 2024, 23:00 UTC) that people could not
access HTTPS websites but could access HTTP websites.We found that the
common denominator was that only customer...
Hi,I'm trying to understand what is specifically meant by 'Count' in the
table produced by a threat log view in FortiAnalzyer.
https://docs.fortinet.com/document/fortianalyzer/6.4.2/administration-guide/523678/managing-a-compromised-hosts-rescan-poli...
Hi, this seems like a real noob question, however I can't seem to find a
simple answer.I understand that Forticlient is end point protection that
requires licensing.Is it safe to assume you can simply use Forticlient
software as the VPN client withou...
Looks like this has happened due to a default setting change in Chrome
(and Edge is a derivative of Chrome) changing “TLS 1.3 Hybridized Kyber
Support” from disabled to enabled which apparently adds extra data in
the client hello
message:https://www....
Hi, Toshi,Thanks a lot for your reply.We'll look to enable PMTU
discovery & also likely look to include MSS adjusting as a default
templated configuration to avoid future scenarios.Our primary concern is
that unchanged/static configuration that worke...
CrazyCatMan wrote:I've asked them to further clarify as follows:"Can you
please clarify the meaning a bit deeper? Say, with a udp_flood Threat,
does that mean if the 'count' shows 20,000 & the DoS policy is set to
the default threshold of 2000, that ...
oheigl wrote:Hi Dirk,I just tried it with a trace I took yesterday, and
it doesn't seem to work. There is only one packet (should be 259) and
Wireshark tells me that the FCS is incorrect. No other packets are
listed. I appreciate the work you put int...
Fortinet customer service came back with:"'Count' means the number of
times the same threat was being detected and the date/time will be the
latest one for the last count updated." I've asked them to further
clarify as follows:"Can you please clarify...
