Hello, I have a problem with my webfilter... it not working anymore. All
web traffics are allowed and bypass the filter...I dont know why... and
it worked fine in the past. I my configuration, i have a fortigate 100E
with 5.6.6 update.I have a IPV4 p...
Hello, I have a Fortigate 100E and i would like to route internet
traffic to 2 differents WAN. Actually, i have made this configuration
and... not working :1. In interfaces, i have my 2 WANS configured with
the ISP ip config2. In Static Routes, i hav...
tanr wrote:Priority 5 is considered "higher" than priority 10, so you've
made WAN2 the higher priority route.Just switch the priority values in
your static routes. Thank you, i have understand 10 is higher than 5 ...
sorry :)When i made 5 priority to...
I have found my error, it was on IP POOL, i have made a ip config for
testing purpose in this menu... deleted and ok. At this time, i have
added a second static route with ISP Gateway WAN 1Destination
0.0.0.0/0.0.0.0 Gateway = ISP Gateway of WAN1 (fo...
tanr wrote:Your static routes need to have the same distances, but
different priorities, that way they will both stay in the routing table,
but the route with the higher priority (lower number) will be used by
default. So, say you have created the ro...
