Hi guys, I just try to troubleshoot internal bandwith issue.So here my
setup.WAN2 = internet speed test can cap my 150Mbs internet serviceWAN1=
Forti APDMZ = Unraid NASInternal hardware= different PC and Raspberry
PIAll port are 1000Mbs full duplexWh...
My setupfortigate 60eFortiOS v5.6.5 build1600 (GA) I need more port in
my network and need to be al on the same subnet.wan2 ISPwan1 will have
my forti APdmz will have my nas/plex serverother will have device. I
tried to create a software switch so dm...
Hi,I am really new to fortigate.I got one fortigate 60e and 321C Fortiap
for home.Here's what I would like to achieve.Register my familly member
as sponsor.when a guest come in, it just go to the portal and
write/select the sponsor mail (one member o...
aj. wrote:Is the NAS on the raspberry pi?The raspberry pi is not
gigabit. No the Raspberry PI is only for my sump pump pit monitoring.My
nas is UNRAID on a I5- 4670 intel setup. The command that I remove that
seem to fix the problem are: config firew...
I did change many things in my 60E at the begining.One thing i'm not
sure in the configIs it normal to have a virtual switch with an hardware
switch like this?Thanks edit "internal" set vdom "root" set ip
192.168.2.1 255.255.255.0 set allowaccess pin...