I am new to FortiOS but need to configure an IPSEC VPN to a Ubiquity
EdgeRouter on the Fortigate 30E firewall. I went through the wizard and
have successfully configured the basics using the Fortinet to Cisco
template than I converted my tunnel to Cu...
So I was able to finalize my VPN setup today and I figured out that the
issue I had was caused by my Password Manager. I use Sticky Password to
auto-fill my passwords and as I was editing the VPN parameters, I don't
know how but it changed the name o...
Last night I rebooted the device and once it came back online, I was
able to list the IPSEC tunnels successfully. I was also able to delete
the IPSEC tunnel I created and I can hopefully start form scratch today.
It is very weird that a GUI issues li...
Thanks for the pointers. I checked the static route but there isn't one
for the tunnel.I checked the objects but there isn't one that is related
to this tunnel, only to another tunnel and the built-in ones.I checked
the policy and there isn't a polic...
Thank for the suggestions Ede! Here is what I came up with: 1 I am
trying to delete the second phase1 and I get: FGT30E3U17035555 # config
vpn ipsec phase1-interface FGT30E3U17035555 (phase1-interface) # delete
snet This phase1-interface is currently...
Here is what I show in the CLI for phase1(the second one is the IPSEC
tunnel I created): FGT30E3U17035555 # show vpn ipsec phase1-interface
config vpn ipsec phase1-interface edit "Remote-Phones" set type dynamic
set interface "wan" set keylife 10800 ...
