Hello,i have some trouble with policy routing.I have try to paint my
setup to the picture.Virtual IP and nat and policy all working when i
use static route but when i change to policy routing it doesn'twork and
i didnt see my fault. here my Policy ro...
Hello,it is possible with a fortigate fw to config more than one port in
the same subnet ?i need more than one ip and more then gig ethernet to
connect with other network but i don´t have access to the other switch
so that i can´t use lacp thanks.
so real live ip are a little bit different but still the same problem
the debug show me this: id=20085 trace_id=193 func=print_pkt_detail
line=5311 msg="vd-root received a packet(proto=6,
172.19.135.205:43524->172.21.92.163:80) from port24. flag , se...
my problem was that traffic that come from vlan1 go sometimes out off
interface24 and sometimes go to interface18thats why i play with policy
routingwhen i start a http request to interface24 to address
172.21.22.30 mapped to vip 10.0.0.1 and go to v...
hello, thank you for the answer. yes the vip‘s are on the fortigate. ok
then i only need static route and forbid http traffic on interface 18
and only allow port 22 and on interface 24 allow port 80 http and deni
port 22
