Hi there,I have a really frustrating problem with OSPF ... I have two
ASAs on the left within the area 1.1.1.1 and a vpn tunnel endpoint with
the ip 192.168.200.1/32I set up OSPF on both ASAs to redistribute the
connected VPN client. That works as I ...
X-HUB (root) # diag ip router bgp showBGP debugging status: BGP
debugging is on BGP nsm debugging is on BGP events debugging is on BGP
keepalives debugging is on BGP updates debugging is on BGP fsm debugging
is on BGP filter debugging is on BGP Route...
emnoc wrote:Did you restart the BGP router process and what do you see
if anything on diag sniffer packet any "port 179"?I would run two ssh
session and restart the router process while running a packet capture
and see if you get any syn/syn-ack from...
Found a problem with eBGP over inter-vdom links. Anyone else having
trouble with it?Neighborship isn't getting formed, state is "idle" and
it says "Not directly connecte EBGP".Although ping is working between
the vdoms.Same config as in 5.6, just upd...
Hi @all, thank you for your replies and sorry for not getting back
earlier.After numerous attempts on getting it to work with OSPF I'm now
stuck with RIPv2 which works perfectly fine in my use-case and is plain
simple. I use it in conjunction with di...
Hi guys, thanks for your quick reply. I managed to grasp the ASBR
concept now.I also realized I wasn't quite detailed in what I wanted to
do :(I got two individual ASAs. A VPN client can connect either to one
or another but will get the same ip addre...
