Re: Final 5.2.1 Firewall Policies module

mickstrick_FTNT · 05-24-2016

https://www.brainshark.com/fortinet/FortiConverter-workshop This workshop reviews FortiConverter release 5.0. We also review a few features planned for the next release, 5.1.0, which are available as a private build to customers with a valid license,...

mickstrick_FTNT · 12-08-2015

This short presentation introduces FortiWAN link load balancing and tunnel routing, and provides hands-on labs for you to try. https://www.brainshark.com/fortinet/fortiwan-tunnel-routing-hol

mickstrick_FTNT · 11-19-2015

Sharing this presentation with a wider audience. I would welcome any comments or feedback. https://www.brainshark.com/fortinet/forticonverter_kick-start Thanks, Mike

mickstrick_FTNT · 09-22-2015

Description FortiConverter's license file uses the hardware id. generated for the PC it is installed on, and the serial number.When the FortiConverter is first registered, the hardware id. must be entered in order to generate the license file, which ...

mickstrick_FTNT · 09-16-2015

Description FortiConverter customers may need to send their firewall configuration files to FortiConverter engineering in order to resolve conversion logic errors. Customers may securely send these files using Fortinet’s SFTP service.The same service...

mickstrick_FTNT · 03-06-2018

This question was recently asked on the Dev alias, fconvert_feedback@fortinet.com, if this wasn't you and you still have this requirement, please contact the alias for details. Mike

mickstrick_FTNT · 03-06-2018

Hi Frank, Please email fconvert_feedback@fortinet.com if this problem persists. Thanks,Mike

mickstrick_FTNT · 01-29-2018

Please see the 5.4.0 release notes for details on the changes, https://docs.fortinet.com/forticonverter/release-information.

mickstrick_FTNT · 01-24-2018

When converting CP to FortiManager, we use the 'any' interface for all interfaces (so the firewall is network based.) To name interfaces in the firewall policy, you should convert to FortiGate first. You can then import this into FortiManager. Many t...

mickstrick_FTNT · 01-23-2018

Yes, you can convert from Smart Center to FortiManager (or FortiGate, you have the choice.) Please note that you require a license for this functionality. If you don't have one, you won't get any output files for the conversion. If you do have a lice...

User Statistics

User Activity

FortiConverter workshop

FortiWAN multi-link VPN (tunnel routing) hands-on labs

Introduction to FortiConverter 4.8

Technical Tip: How to update the hardware id. associated with a FortiConverter serial number

Technical Note: How to securely send firewall configuration files to FortiConverter engineering

Re: Cisco ASA/PIX/FWSM conversion: Plans to auto-expand DM_INLINE.. Groups ?

Re: Forti Converter v5.4.0 Build0345 : cannot tune / edit policy

Re: ASA and PIX

Re: Checkpoint to Smartcenter to FortiGate firewall (VDOM)

Re: Checkpoint to Smartcenter to FortiGate firewall (VDOM)

Re: Final 5.2.1 Firewall Policies module

Fortinet Training Institute

KCS

Fortinet Certified Trainers

WiCyS NSE 4 Certification Summer Camp