Hi, I have short question. Fortigate 200F has two sfp+ ports assigned to
fortilink. Do you know if another two ports can be assigned as fortilink
ports and used as another aggregate or there is limit just to this two?
Hi, IPSec XAUTH tunnel with external authentication over radius on
Fortigate FortiVM in 6.4.5.Devices are trying to establish IPSec
connection.DPD is configured.Till now it is ok but sometimes if device
lost connection or just after reboot previous t...
Hi,I'd like to forward whole NTP traffic to my NTP server.I'd like to
use VIP where source IP is in range from 0.0.0.0-239.255.255.255 and do
portmapping 123-123 (use service NTP). set type load-balance set service
"NTP" set extip 0.0.0.0-239.255.255...
Hello, I would like to use my 300D as some kind of ipsec concentrator.It
will be used for a lot of dialup connections. Every connection is
authorised by configured radius server. Till now everything is ok and
configurated (phase 2 is established). Ne...
In a perfect world (in other integrations :D ) it is done by one2one vip
for each servicwe.In this case i had to do this trick.0.0.0.0/0 didn't
work. I had to use elimination.Thank you Ken
