Hi, we have a FG 200B with 4 FortiAP. We use guest access via captive
portal. I have a problem when users with ipad/iphone connects via guest
portal, and after turning off their screens/locking devices they need to
re-authenticate all the time. Is th...
Hi, we have a FG 200B with 4 FortiAP. We use guest access via captive
portal. I have a problem when users with ipad/iphone connects via guest
portal, and after turning off their screens/locking devices they need to
re-authenticate all the time. Is th...
Hi, running FortiGate 200B-POE and AP 220B. Apple devices
(macbook,iphone, ipad) periodically drops the wifi connection. Users
have to re-connect. That happens a couple times a day at least with no
obvious time interval/reason. FG running 5.0.4 AP ru...
Hi, if we choose to use NAS for storage and the NAS crash, will
fortimail stop processing/delivering mail? In other words, are the
queues and critical information for delivery stored on the NAS? We want
to store quarantine and e-mail archive on NAS, ...
Hi, we are trying to specify several tunnels in a FortiClient, but the
maximum that works is seven. We can actually add more (more than seven)
but they won' t work. Does anyone know if there is a limit in the number
of tunnels you can specify in Fort...
Solved my earlier post, it was the APN that was wrong Config for Huawei
E367, FG60C, Firmware 4.0, mr3, patch6. Operator swedish Tre with static
IP: ------------------------------------------------- config system
modem set status enable set auto-dial...
hi, trying to get a Huawei E367 to work, modem detected ok as E367 but
dialup hangs - then redials and re-loop. config: ------- login as: admin
FGT60C3G10022181 # show conf modem command parse error before ' conf'
Command fail. Return code -61 FGT60C...
Hi, I have been able to activate a Huawei e367 usb modem, as custom and
being detected. but when checking the debug output it halts at " send"
as below , any ideas? FGT60C3G10022181 # redails:0 isp:0
dev:/dev/ttyusb0 tel:*99# mode=0, dial=2, autodial...
