Is if possible to Create Multiple SSL VPN Groups that have limited
access to different Networks AdminVPN Users able to get to systems and
managementStandardVPN Users able to get to what systems they need but
limitedand so on Thanks
Dears, What is the best way to connect a TP-Link 1600 VDSL ISP router to
a FG90EI want to use the FG for VPN, DHCP and other policies. the ISP
router is providing a nated IP 192.168.0.xI tried connecting a wire from
the router to WAN1 port after disa...
Hi, I have two switches, SW1 for internal LAN, SW2 for GuestI want to
setup management ports for both switches on VLAN 99 (10.10.99.0/24)SW1
is directly connected to FG90E port that has the VLAN 99 configured on,
I can reach the management IP of SW1 ...
What is the best way to separate a guest network from internal LAN to
feed a guest WiFi AP?I'm currently using a FG 90E box and dedicating a
physical port (not part of a switch group) and put it in a zone with the
option "Block intra-zone traffic" ch...
Since my guest network is attached to a physical port that is not part
of the internal LAN and have it in a zone that doesn't allow internal
traffic and has a policy to allow traffic to WAN only. is this
sufficient or I should be using a Vlan on one ...
