Hello all, hoping someone has an idea to help me out on this config
issue. I have a full Fortinet setup between 2 buildings connected via
fiber. No issue. FTG in HA and 5 48 port switches all managed on the
FTG. My addition (and problem) is adding my...
I have an FVE 300 and have found it will not auto-discover any new
handsets for over 90 mins. After that time, they do get discovered and
configuration happens quickly after. I just can't figure out why it
takes this long. Has anyone had this happen?...
I am missing something, I must be. In 5.6 OS, Security Profiles > Web
Filter and I can see the default (or other) profile and I had a option
for users who where allowed to bypass a block, via user account locally.
On 6.0.4, I no longer have that opti...
Anyone have a document or know how to change the default timeout of the
570 main screen? All ours go blank after 60 seconds, no matter what
power saver settings are on the phone. Using a FVE-300
Hello all, have a VPN project and having a problem. Almost got it
though... I have a 200E and a test 60E at a remote site I want to set up
a VPN between the 2 sites, but have redundancy for the 200E if an ISP
goes down at the 200E location. 200E conf...
The address was in the system, still no change. I started adding my 570
phones, they come right up. Tried another 345, they took almost 95 mins
to be discovered.
Why not use port forwarding? You can map the ports and IPs as well as
restrict who can use that port if needed as well, to further lower who
can get in. If not VPN or Port Forwarding, it would have to be an
outbound type connection that you can't rea...
You can categorize it yourself, on demand. Assuming you use Category
based filters: Go to Security Profiles -> Web Ratings Overrides At the
top, create a custom category as 'allowed' Once back on Web Ratings
Overrides page, Create New. Add the domain...
