Re: FortiDDoS VM can't set management IP

SteveDDoS_FTNT · 04-12-2016

A new file: Solution Brief - FortiDDoS-Verisign Hybrid Cloud DDoS Mitigation , has been uploaded. https://fusecommunity.fortinet.com/p/do/sd/sid=1420 Steve Robinson - stephen@fortinet.comPM - FortiDDoS, FortiWAN/AscenLinkPhone: +1-716-261-1308Mobile:...

SteveDDoS_FTNT · 11-07-2019

Hello,In this case, ignore what your VAR told you. Your instincts were correct. Normally you need to attach the system to your Internet link(s). Note Odd ports (1,3,5..) must face your firewall or "inside" network and even ports (2,4,6..) must face t...

SteveDDoS_FTNT · 09-18-2019

First, the VM you have is not for FortiDDoS. It is a FortiDDoS Central Manager. It has almost no value without FortiDDoS appliances. Because all FortiDDoS mitigation is done in hardware (TP2 and TP3 ASICs) we do not offer a VM version of FortiDDoS. I...

SteveDDoS_FTNT · 10-08-2018

Your message is the FortiDDoS forum but your Release numbers appear to be FortiGate. FortiDDoS would be 4.6.0 and 4.5.0. If FortiDDoS, downgrade to 4.5.0 would not be recommended. Contact TAC and please provide the following info:- Can you access the...

SteveDDoS_FTNT · 04-30-2018

1) The system must learn and then Traffic Stats reports generated and System Recommendations Thresholds set before you will see any Thresholds.2) This is used very seldom. Once you have thresholds set, if you add another link, for example, and immedi...

SteveDDoS_FTNT · 07-28-2017

Sorry for the delay on this. That looks like a normal upgrade. The chip reconfigure message you were getting before should happen if you are upgrading to 4.2.3 or 4.3.x. Those upgrades did extra TP2 installations to help with future upgrades. However...

User Statistics

User Activity

New File

Re: FortiDDoS config

Re: FortiDDoS VM can't set management IP

Re: with version 5.6.0 every time logoff

Re: Enable detection mode

Re: FortiDDoS Upgrade Loop

Re: FortiDDoS VM can't set management IP

Re: bad syn packets

Fortinet Training Institute

KCS