Is there any way that i can search for more than 100 ip addresses? What
i do the searching in analyzer as below: srcip=1.1.1.1 or srcip=2.2.2.2
or srcip=3.3.3.3 And this way will allow maximum 30 ip addresses to key
into search field, so is there any...
Hi, we have couple of deny rules that deny certain ip addresses (lot of
them) and services, for example for trust to untrust, and then deny and
logging. So we wonder if put that rule on top will cause more memory
used, or we should put it on the bott...
I know from the dashboard under license will show as below, but how do i
see it from the last few month?Used GB/Day Today(Jul 20, 2016)0.27 GBJul
19, 20160.61 GBJul 18, 20160.61 GBJul 17, 20160.25 GBJul 16, 20160.26
GBJul 15, 20160.63 GBJul 14, 20160...
Let's say 1 user ABC has connected wireless (192.168.1.100) and wired
(172.16.1.100), at this point no issue for FSSO, but once the user
disconnected from wired, and use wireless to continue, then FSSO will
not able detect user ABC. (it happens rando...
awasfi wrote:Hello, It's easier to run a report filtered by the source
IP addresses using comma separator.You can add multiple IP addresses to
the same srcip filter, however I'm not sure how many IP addresses the
filter will accept. If the filter acc...
James.F.Holmes wrote:Both suggestions above (Wild card and the IP range)
are better that what I would have done :), but I would add that you can
search by CIDR notation as well: srcip=10.1.1.0/24 for example. my
source ip addresses are not under the ...
use a linux server, then config a script to schedule backup as below:
#!/bin/bash #linux/UNIX SERVERS="your_fortigate_ip_address" # SSH User
name USR="your_fortigate_username" PWD="your_fortigate_password"
timestamp=$(date +"%y-%m-%d") # connect each...
scao_FTNT wrote:FAZ record GB/Day usage in event log, so you can do
search in System Settings - Event log for " message=*"Used log GB/Day"*
" Thanks Simon Yes, i managed to see the Used log GB/Day. Thanks a
lot!!!
