Looking to allow remote FortiClients to talk to each other. An example
is, I'm remote on FortiClient and I need to RDP to another FortiClient
via RDP. I've created a rule to allow SSL_VPN_TUNNEL addresses and
SSL_VPN_USERS to talk to SSL_VPN_TUNNEL a...
Yeah... this was the damnedest thing and I'm still not sure if I
understand it but it's working. In order to resolve this I needed to
modify my ssl tunnel address range used for the client pool. My range
was from x.x.x.1 to x.x.x.100. When I modified...
OK... so here's a couple of tests sniffing packets from the ssl.root
interface... #1. PASS - I have a Cisco ASA in parallel with the FGT-400E
that the FortliClients terminate on. I can see traffic flow from Cisco
AC to FC-VPN from the internal int to...
OK... so here's a couple of tests sniffing packets from the ssl.root
interface... #1. PASS - I have a Cisco ASA in parallel with the FGT-400E
that the FortliClients terminate on. I can see traffic flow from Cisco
AC to FC-VPN. #2. FAIL - I then conne...
Sure.... see below.... edit 6 set name "SSL VPN traffic to SSL VPN
traffic" set uuid 32cd8256-694f-51ea-a654-xxxxxxxxxxxxxx set srcintf
"ssl.root" set dstintf "ssl.root" set srcaddr
"goodwill-FC-VPN-x.x.x.x_21" set dstaddr "goodwill-FC-VPN-x.x.x.x_21...
