Hello, Having issues keeping a VPN Site-to-Site tunnel up.. My devices
are a FG100D and the remote device is a FG30, both have been updated to
v5.2.3 firmware. I set up the site-to-site with the VPN wizard, the VPN
tunnel was working for about 3 days...
Still having the issue on my end. Changed PHASE 2 back to all zeroes
since it did not have any effect and emonoc mentioned it should not have
any relevance. @emonoc - I made the changes back to all zeroes. Added
the kelifeseconds and the keylife-type...
UPDATE: Uptime was about 5 days, the tunnel went down. Rebooted the 30D
and the tunnel came back up. Co-worker said he read a post about a
similar issue to mine. The fix was to update the Phase 2 section of the
tunnel with the correct local and remot...
All of these steps were done on both sides. - I changed the tunnel from
a Wizard created Tunnel to a Custom Tunnel.- In Authentication, changed
the IKE to V2..- In Phase 1 - Setup different Diffie-Hellman groups than
the default (make sure it matches...