Our 90D is in Interface mode. We are now trying to setup vlan [
Interface>Create New>VLan...] after doing this we realize that the vlan
isnt working ... Is there anything step that we are missing ?
We're using 90D at HQ and at 30D Branches we have configured an IPSEC
vpn, at times the VPN fail and we would want the second connection which
is a ISP VPN to kick in automatically How can we accomplish this ?
Currently we have a 90D at our MAIN office and 30d at each branch.We
have configured Site-to-Site VPN using WAN1 and connected an ISP base
metro VPN to WAN2 What we want to accomplish is when ever the internet
is slow on WAN1 the route traffic to WAN...
We're having some issues with our IPSEC VPN we have a 90D at our HQ and
a 30D at our branch At times we notice that the VPN status is "UP" but
we're unable to communicate. After a reboot of both device everything is
good again ... what could cause th...
How can we accomplish connecting two ISP to our fortigate device, these
ISP as configured a WAN for us.Our business is classified as mission
critical so at all time we MUST be connected. ISP A and B is connected
to our HQ Fortigate and each port is c...
90D Frimware Version : v5.6.2 I am trying to setup Vlan ( I am new to
vlan)where dept A gets a different ip range etc...I Took out Internal
Port 14 from the lan and configure it to be vlan 270 Now i plug a pc
directing into P14 and configure the PC v...
Yes What we notice is that we're unable to bring down the vpn no matter
how many times we click bring down What we have to do is disable the
interface and then it's down Once we bring it up we still can't get any
connection until a reboot We've not t...
