Most Liked Posts Recent Solutions
No Content Available

User Activity

We are running 5.2.2 and using an IP Pool. We are using the default type of "Overload". We do not have the "Fixed Port" option checked on the policy, yet the Fortigate still uses same source port rather than allocating a new one. According to the doc...
We use VIPs to port forward traffic to our web servers. When we enable NAT on the policy, it uses the internal network interface IP address as the source IP. Is it possible to specify a secondary IP address as the NAT source rather than the interface...
I've got a really strange issue that we've spent a week on and haven't been able to get anywhere. Here are the specs:FortiGate 600C running 5.2.2 in a HA Active-ActiveConnected to Cisco 3560X switches with LACP aggregate interfaces We recently switch...
We are trying to set up a security policy that requires the user to authenticate to the firewall when accessing a particular internal web page. It works fine if the destination site is on port 80, but not when the site is hosted on a different port (...
The issue below occurs in an environment with 2 Fortigate 600Cs in HA pair with 5.03 and 5.06 software. We' re experiencing random distorted Web properties (images, CSS, javascript, etc.) when enabling web cache on a policy. This will begin as soon a...
My Accepted Solutions