Hello All, How can i configure policy based VPN tunnel with over lapping
subnets.I am using FG firewall at both ends, i have tried to configure
Policy based VPN at both ends with different subnets and its up and
running. But how can i configure with ...
Hello All, I have been facing a issue from last few days, i am not able
to access https://slack.com, "https://hubspot.com" both URLs.Same URLs
are working properly before. We are not using any Webfilter, Application
Control, IPS or AV on our firewall...
hello all, We have a fortigate firewall 600c model. We have configured
port1 and port 2 as internal interface. Port1: 192.168.1.0/24 network,
Port2: 192.168.2.0/24 network. Policies are applied like Port1 to Port2
allow all, Port2 to Port1 allow all....
Hello All, We are using 110c fortgate firewall with v4.0 (MR3 Patch 6)
and valid webfilter license. we are created a webfilter profile as
default and applied it to policies. The issue is, its not filtering the
websites. From last few months its worki...
Joru, Here i am sharing you a jpg file it shows a policy rule. In last
column i indicated with red circle, that is a webfilter column. I
enabled UTM option for this rule but i did not see " defult" webfilter
in last column. I suspects this is the iss...
Thanks Joru for your reply. Yes am able to ping service.fortiguard.net.
Below are the policy order in firewall 1. policy for IPsec vpn 2. policy
for remote access vpn 3. any to any These are the policy order which i
was defined in my firewall. We did...