About danielator

danielator · 08-02-2021

Hello,default Fortinet DNS (208.91.112.53 and 208.91.112.52) seeams to be out of service ?OK by manually setting "google" as second DNS.ThksDaniel

danielator · 12-07-2018

Hello, impossible to upgrade a FGT90E from v5.6.7 build1653 (GA) to v6.0.3 build0200 is anyone ever tried ThanksDaniel

danielator · 03-16-2017

Hello, is there a way to aggregate the two WAN interfaces on a fresh new FGT90E. (I mean after erasing any references to WAN1 and WAN2)At least, I tried to setup a WAN Hardware switch, but it seems restricted to the LAN part. Is there a way to use th...

danielator · 12-07-2018

It's OK using the "FGT_90E-v6-build0200-FORTINET.out" file, downloaded from Fortinet.Thanks a lot

danielator · 12-07-2018

same issue, will try with downloaded image from my Fortinet support account.

danielator · 12-07-2018

I'll try to first jump to v6.0.0, like on the picture 

danielator · 12-07-2018

sorry, please found the pictureI don't have control over the image file downloaded. Can I download it on my computer, then upload it in the device ? Thanks

danielator · 12-07-2018

I tried to upgrade to v6.0.3 in the "System" / "Firmware", and after few time, got the error message "image upgrade failed", like on the screenshot below. The FG90E is part of compatible materials, in the v6 "release note".[link]https://ibb.co/FY7RS4...

User Statistics

User Activity

Fortinet DNS not working ? (208.91.112.53)

[solved] Image upgrade failed when trying to upgrade a FGT90E

WAN1 and WAN2 aggregagtion on FGT90E

Re: Image upgrade failed when trying to upgrade a FGT90E

Re: Image upgrade failed when trying to upgrade a FGT90E

Re: Image upgrade failed when trying to upgrade a FGT90E

Re: Image upgrade failed when trying to upgrade a FGT90E

Re: Image upgrade failed when trying to upgrade a FGT90E

Fortinet Training Institute