Hi all, I have one 4TG8 VM firewall acting as a gateway for two guest VM
servers. Both are on the same subnet 192.168.1.0/32 using a 1-1 Static
NAT to go out to the internet. Is there any way to know if the traffic
that is accessing the guest server ...
Hi All, I want create a one to one static NAT for 2 servers through a
fortigate-VM firewall. Server 1 VIP: (192.168.2.2) -> Server 1 Private
IP: (10.0.3.2) Server 2 VIP: (192.168.2.3) -> Server 2 Private IP:
(10.0.3.3) I cant seem to figure this out ...
Hi All, I am NATing 2 servers through a fortigate firewall. Internet |
Fortigate (NAT) | | VM1 VM2 When I check the access logs on the servers
being NATed (VM1, VM2) all the traffic has the source IP of the
fortigate server. How can I make it so the ...
I am using the Fortigate VM 4.0. On first install it says I have 14
evaluation trial. It looks like I need the following license. VM License
FortiGaurd (maybe ?) and optional FortiClient Software How would I
install what I need from command line inst...
That would be nice if all this was not virtual. The Fortigate is also
virtual. The illustration represents what I would like to do. Both are
on the same 192.168.1.0/32 subnet. which is a vSwitch in vCenter
Sorry for being a nitwit here but figured out the issue. Rule number #1
of IT: Always check the firewall of the server first. My co-worker,
unknown to me, had set iptables to only accept traffic from fortigate
private ip address. This is why i could ...
Sorry for being a nitwit here but figured out the issue. Rule number #1
of IT: Always check the firewall of the server first. My co-worker,
unknown to me, had set iptables to only accept traffic from fortigate
private ip address. This is why i could ...