Hello, I have two Fortigate VM in AWS. each one in a different zone,
running in HA. exactly this setup:
https://docs.fortinet.com/document/fortigate/6.4.0/aws-cookbook/229470/deploying-fortigate-vm-active-passive-ha-aws-between-multiple-zones
The dif...
Hi Fortigate FG200B Firmware Version v5.0,build0208 (GA Patch 3) I have
a wan to share among all the office users. I would like the users be
able to use the maximum bandwidth available at a moment. but their
bandwidth could be reduced if a another jo...
Last night I tried to upgrade firmware. First when restoring conf from
5.0 to 5.03, I had few errors FG200B-work4-mp # diagnose debug
config-error-log read >>> " set" " gui-implicit-id-based-policy" "
disable" @ global.system.global:command parse err...
It seems my dhcpd has a high memory usage. few days ago the global
memory usage was about 80%, in " diag sys top" dhcpd memory column was
at something like 50. I had to " dhcp lease-clear all" to fix it The
memory usage is growing again. and at this ...
Thanks for advices. I' ll check on the next scheduled downtime. I have a
Fortigate Storage Module as log disk. " exec formatlogdisk" will format
the internal flash not the hard drive ?
I created 2 Per-IP shapers. one with 200kbps shaping one with 1000kbps
shaping I created 1 policy for upload from my interface to wan, using
200kbps per-ip shaper I created 1 policy for download from wan to my
interface, using 1000kbps per-ip shaper ...
thanks four your quick reply I don' t understand. where do you create
this filter ? In ther per-ip shaper there is only 1 field " Maximum
Bandwidth (1-16776000 kbit/s)" which seems to apply for both ways. in
Policy, when applying shaper. I can tick a...