Dear All, i have a Fortigate 100D 5.2.2 latest firmware.my scope is to
map a public ip A to a host that is accessible on another site to site
through ipsec vpn. What i have done is : Create a virtual ip A mapped to
host 10.20.10.2Create the firewall ...
Dear All, I have a forticlient ipsec users. I need 1 user to be able to
use RDP throught the same vpn tunnel and others not. Vpn Tunnel is
working great. When i create a rule and using the Source User(s) the
user i need to have rdp allow, the traffic...
Dear all, I have a fortigate 100D on A Site and 80C on Bsite. What i
need is to forward the all the traffic from 2 Public Ips from 100D to
internal interface of the 80 C where two servers exist. 100d and 80 C
are connected with Ipsec Interface Mode. ...
Dear All, i have fortigate 100D and i need to add in the same subnet the
DMZ port and 5 ports from the physical ports to be on the same member
list. What i need to do is to connect direclty my 5 DMZ servers on the
fortigate ports instead of using ano...
Dear All, I have FG 80C and have create a ipsec vpn using the
forticlient. On fortigate i have a site to site VPN . I have use the
split option so all the wan traffic goes to laptop gateway and the rest
to VPN tunnel. I need to have the posibility th...
Hello,Tested on 6.4.2 i have finally succeeded with Fortigurad to use
the below but is still not working as expected .It blocks at least some
but not all as with previous Versions ( 6.2 or 6.0.10).F-SBID( --name
"SMTP.Login.Brute.Force.Custom"; --pro...
I have the same problem with 6.4.2 for SMTP . F-SBID( --attack_id 8641;
--name "SMTP.Brute.Force_NEW" ; --pattern "Authentication failed";
--service SMTP; --no_case; --rate 0,5,limit ; --track dst_ip; --flow
reversed;) not working . in 6.2 the below ...
Dear All, finally i solved it.I create and IP Pool with My Public IP and
i have used it in the firewall policy and it worked.As Summary i have
done Source Nat to my Public Ip. Thank you all for your reply.
Thank you too for your reply. the debug log results is the
below:==========================================2015-02-14 07:37:48
id=20085 trace_id=1 func=print_pkt_detail line=4373 msg="vd-root
received a packet(proto=1, 178.128.20.20:1->150.150.216.28...
Dear Emnoc , thank you for your reply.i have already added the A public
ip of y wan interface and with this action i still getting the same .In
the phase 2 i have the a/32 and the network 10.20.10.2 and still getting
the same ( No matching IPsec sele...
