I'm trying to setup a couple of AP. I got the AP setup in the FortiGate
unit but its being blocked by the local-in-policy. Am I even looking at
the correct local-in-policy? I even tried setting the deny to accept on
the 2nd and 4th policies. Only wan...
I'm having some problems with a site to site vpn connection to our
external data center. The errors are occurring randomly and only get
resolved after bringing down the tunnel. The error number says "Invalid
ESP packet detected (replayed packet).". T...
I setting up a site to site vpn connection using a FortiWiFi-60
3.00-b0753(MR7 Patch 9) and a FortiGate 80C v4.0,build0279,100519 (MR2
Patch 1). I got the VPN connection online using policy based connections
but, when I try to connect with Remote Des...
I have setup IP Address ranges to block non u.s.a users, I have it setup
like this. I have the ranges setup in this format
61.0.0.0-61.255.255.255, then I add them all into a IP Group. I place
the group at the top of the list with DENY all. Some of t...
I did not have the CAPWAP enabled on the FortiGate internal interface.
Enabled it and a minute or two later the unit status is now showing
Online. Thank you very much! Now to cancel the ticket. I tried Support
Chat first and they forwarded it to supp...
I went back to a route based setup and I got the machines connecting to
the others network now. Thank You for the help, especially on some basic
trouble shooting which I had forgotten about.
I ran this from the WiFi(172.16.5.111) device to the
ForgitGate(172.16.10.112) device. # exec ping-options source
172.16.5.111 # exec ping 172.16.10.112 PING 172.16.10.112
(172.16.10.112): 56 data bytes 64 bytes from 172.16.10.112: icmp_seq=0
ttl=255...
Yes I included static routes to the other network. For device 1, I had a
static route for device 2 addressing and pointed it to the VPN
interface. I then did the reverse on device 2. Also I was able to get
the VPN monitor status back to Online the pi...
In the VPN monitor section the connection the status said Online, but I
remember that it couldn' t ping a machine on either network. I have some
remote users using the FortiClient to connect and they have never been
able to ping a machine through the...