1. I have created two VPNs, Site-A can access both Site-B and Site-C
first local network, but can not access other local vlan networks,
neither can access Internet, is it a routing problem?! 2. The VPN Phase
2 selector should add all the specific net...
After setup FG-300C Network>DNS Server (LAN interface Recursive Mode,
DNS Database Entries), it only work for Internal name resolve, but can
not resolve External name. what could be the problem?
I create two dialup vpn and two access policy from WAN to LAN, I want to
separate different account with different LAN access rights (ex. dialup
user A can only access some LAN servers, dialup user B can access whole
LAN), but it seems not work?! (4....
toshiesumi wrote:It's called as "hub and spoke" vpn set up, as Site B is
the hub.If you want to use 0/0<->0/0 for the phase2 selectors, you need
to match this with the other end. An you need only one phase2 with it.
But if you use 10.239.2.0/24<->192...
Is it possible that via TFTP or some other way to upload firmware?
(which like this document
describe)https://www.manualslib.com/manual/661127/Fortinet-5003a.html?page=23