Dear all, i'd like to change Forticloud's acount of my fortianalyzer,
but i do not have any button to logout. Can you help me please? Thank
you in avdance,
Hi all, I have a fortigate with a pptp server. Clients can connect and
access the whole network behind the fortigate, but not inversely.Do yo
know if there is any way to make it working? Thank you in advance,
Regards,
Dear all, We have a Virtual Fortigate with a virtual disk for logs. The
prioble is that i'm not able choose this disk. I'm running vdoms. i've
read lot of docs and i can not find the solution. Can you help me
please? I'm running 5.6.6 version. Thank ...
Hi all, i'm trying to add a vlan on WAN1 as ISP works on this VLAN and
the session is PPPoE. I'm running on 5.4.1, bunt i get this error :
Input value is invalid. Here is the config : Interface name : pppoeType
: VLANInterface : WAN1VLAN ID : 10Role ...
Hello all, I'll try to explain my scenario. My office (192.168.7.0/24)
has an ipsec to a remote location (10.133.3.0/24). My office subnet is
natted to 172.31.19.0/24. So IPSec (tunnel mode, not interface) is set
between 172.31.19.0/24 to 10.133.3.0/...
Hello emnoc. I already have an ipsec tunnel, but the Internet line is
currently down. So im trying to establish another tunnel through 4G
modem, and with this solution i cannot establish an ipsec tunnel :(
Unfortunately Fortigate creates an unique interrface for the L2TP
server, so i need to choose the correct gateway address. I'll open a
ticket on fortinet portal. Thank you for your help :)
Hello sw2090, Thank you for your response. I need to add an ip instead
of gateway interface as i have many l2tp tunnels. So for me
10.30.15.0/24 should be routed through 10.10.10.2 and 192.168.199.0/24
should be routed through 10.10.10.3. Policies ha...
