Hey Guys,I noticed a weird behavior on the latest 5.4.5 firmware.If I
enter a command like show vpn ipsec phase1-interface the PSK hash
always changes with every execution of the command. Also If I make two
configuration backups a few seconds within...
Hey Guys, following problem: I have a FAZ VM set up in the azure cloud,
and I want to send the logs from the FortiGate to it via IPsec
encryption. I configured everything accordingly, but the FAZ drops the
IPsec packets from the FortiGate. The azure ...
Hey Guys, has anybody of you ever installed a FortiManager VM on a
Hyper-V server? I tried to convert the virtual disk but if I want to
boot the VM I got many error messages. (Kill process, Out of memory,
...) Many thanks in advance, Oliver
Hi everybody! I have recently updated the firmware of our Fortigate 310B
Cluster to the latest version MR1 Patch 3. I now experience a very slow
performance of the web interface, also the CLI via SSH is much slower
than usual. Does anyone share the s...
Yes that is possible, either you configure everything to "be" on the
same VLAN from a switch point of view, or you can chose to create a
switch on the FGT itself and put the respective interfaces into this
virtual switch.
It seems to be a mismatch between the EAP types you selected, either on
the FAC or on the client. Can you share a screenshot of your SSID
configuration and the policy (Test2)? Maybe the client is sending an
EAP-TLS request, and not a PEAP. Are you en...
