Is there still a way to write/use scripts with Forticlient if it is not
being managed with the EMS tool? The VPN connections works great but I
would like to automate some downloads once it is connected. ThanksAndy
Probably a basic question, but did not find it in the forum or manual.
How can I see how much bandwidth is being used by our network thru the
WAN or internet port of our Fortigate 60C unit? I know there are graphs
on the desktop/console but am not ex...
We have a 50A firewall that we currently use to connect about 25 users
to the internet via a T1 line. We will soon switch it to a cable
internet conn with 50MB download/10 MB upload. I tested this new
internet connection by connecting 1 PC to the For...
Sorry if this has already been discussed, couldn' t find it. We have a
50A firewall connecting 25 PCs with internal IPs (192.168.xx.194-219) to
5 external IPs provided by our ISP. What is the best way to utilize
these IPs for our internet traffic? We...
Is it possible with a Fortigate 50A to see what the bandwidth or usage
through the external or WAN port is? The firewall is connected directly
to our T1 connection & our ISP is reporting that we are using >90% of
our bandwidth most of the time. I wou...
Thanks for the reply. I have found this widget & will use it. We have
customized the anti-virus slightly, but are basically scanning all
protocols. Do you have suggested anti-virus tweaks? We do not have a lot
of heavy users. Thanks Andy
Ok, thanks for the advice. We' ll move in that direction. Also, when we
set this up do we need 1 ip for the firewall & then 1 for the rest of
the traffic? I mean if we wanted to access the firewall settings are you
using the same ip # that everything...
Thanks for the reply. I used the graph of the network utilization as a
rough guide. Turns out that a couple machines on the network had an
Adobe Updater problem that was using up the bandwidth. Very good forum.
Found out lots of interesting info abou...